AOYAMA Small Machine Room Passenger Elevator

Add to My Constguide favorites

AOYAMA Small Machine Room Passenger Elevator

AOYAMA ELEVATOR GLOBAL LTD
الصين

المواصفات الفنيه

AOYAMA Small Machine Room Passenger Elevator

Product Details

The AOYAMA small machine room passenger elevator integrates advanced technologies such as safety, energy saving, and quietness to raise the configuration to a new level, creating a model of vertical traffic in buildings, and easily meeting the needs of hotels, office buildings, shopping malls, and other places.

Features:

1. Standard five-party call configuration to avoid emergency accidents during use and maintenance.

Several silent technologies are applied to provide passengers with a quiet ride experience while greatly reducing noise pollution to the environment.

2. LED green light source lighting can convert more than 90% of electrical energy into light energy, which can save more than 80% of energy compared with traditional lighting.

3. An energy feedback device can be selected to convert the potential energy generated by the elevator operation into electrical energy to feed back to the grid, which significantly reduces energy consumption and guarantees green operation.

4. The intelligent operation control method can be selected, which can effectively reduce the elevator running time and increase the conveying capacity, and it can also pick up and drop off designated passengers regularly.

Main basic functions:

>Automatic door closing delay After the car door is fully opened, it keeps the door open and closes automatically after the delay.

>The door is held outside the floor. The elevator is closing the door or closed but not started. If the door is called on the floor, the door will be reopened.

>Light curtain protection When the light curtain is blocked, the closing action will immediately stop and automatically open the door.

>Do not close the door when overloaded, the door will not be closed when overloaded, the overload light will be on, the buzzer will sound, the CZ or overload character will sound in the car, and the elevator will not start.

>Full load and go straight. When the rated load is reached, it only responds to internal selection and does not respond to external calls.

>Automatic lighting control If the elevator does not receive a running command within the specified time, the lighting is automatically turned off, and automatically turned on when there is a command.

>Fire return The base station fire switch was activated, all instructions were canceled, and the elevator immediately drove to the designated rescue landing station to stop.

>Repeat door closing After executing the door closing command, the door does not close in place within the specified time, and the door is closed after reopening.

>The floor and direction displayed in the car The floor and the direction of the elevator are displayed in the car.

>Safety circuit protection When the safety circuit is disconnected, the elevator will stop running immediately.

>Door interlock protection All interlocks are closed before the elevator can run. If the door interlock is disconnected or shakes during operation, the elevator will stop running.