GATE VALVES 250PSI / 300PSI FLANGE X GROOVE FGN108
|
Add to My Constguide favorites
GATE VALVES 250PSI / 300PSI FLANGE X GROOVE FGN108
|
Description
Outside Screw and Yoke Gate Valves Models FG0135, FG0138, FGO907, FG0131 Rising Stem Flanged Joint Ends Resilient Wedge Gate Valve Bolted Bonnet · Rising Stem · Resilient Wedge · Flanged x Flanged Flg x Flg Freezing Weather Precaution: Subsequent to testing a piping system, valves should be in an open position to allow complete drainage. Resilient wedge Gate valves 2” – 16” is available as Non rising stem and as an OS&Y Gate valve in 2 ½” – 16” sizesDescription
Outside screw and yoke gate valves are recommended for service indoors and in pits outdoors. They are not recommended for
throttling service. The stem indicates at a glance whether or not the valve is open. Smaller sizes, 2/A through 2 in. NPS inclusive, are
of bronze. Large sizes, 2 1/2 through 14 in. NPS inclusive, are of iron, bronze mounted. One manufacturer makes valves of bronze up
through the 3 in. size. Unless otherwise noted in the listing, these valves have 175 psi (1205 kPa) rated working pressure.
Models FG0135, FG0138, FGO907, FG0131 Resilient Seated Gate Valves. Rated Working Pressure of 300 psi (2070 kPa) unless
otherwise noted below. Available with the end connections listed below.
AWWA C509 250PSI / 300PSI
250Psi/300Psi/17.2 bar/20.7 bar Non shock cold working pressure
Conrms to AWWA C509
Coating-Electrostatically applied fusion bonded epoxy coated 0.2 – 0.5 mm inside and outside
Maximum operating temperature 160°F/ 71°C
Encyclopedia
Tenders
Hall Of Fame