Rear Tipper & Dumper Semi Trailer 2/3/4 Axles
Description
MIS manufactures all kinds of tippers using hydraulic components and cylinders from international companies. Capacity: They are determined according to the customer's request in proportion to the density of the material transported Chassis: Made from I-shaped beams reinforced from inside and outside by a suitable amount of cross members to ensure the load distributions King Pin: With King Pin 2” or 3.5” depending on the Truck's fifth wheel size. Brakes: Two lines air brake system works with Servo or EBS or ABS with the truck brakes. Landing Gears: Two landing gears. Box: - Floor: made from steel plates and fixed on two longitudinal U channels and supported with U profile cross members. - Sides: made from steel plates and reinforcement with a suitable amount of U shape parts. Electric Circuits: Full 24 volts circuit with stop lights, signal lights, and reflectors necessary for traffic Laws. Additional accessories: The semi-Trailer is provided with a toolbox (without tools). A semi-Trailer is supplied with 2 spare wheel carriers (according to the customer demand). Semi-Trailer Tipper is equipped with a complete set of hydraulic equipment including Ram, pump, and tipping parts. Semi-Trailer Tipper is equipped with a stabilizer for safety during tipping. Paintings: Exterior surface treatment by shot blasting, painting by high solid primer directly on the surface, painting inside a special paint booth with the cargo cabin color or the color chosen by the customer.Rear Tipper & Dumper Semi Trailer 2/3/4 Axles