• شركة
  • المنتجات
  • الكتالوجات
  • الأخبار
  • الأحداث
  • المشاريع
  • الوظائف
  • العقارات
new

Clinker-Portland cement clinker

Add to My Constguide favorites
Clinker-Portland cement clinker Clinker-Portland cement clinker

المواصفات الفنيه

Clinker-Portland cement clinker

Portland cement clinker is made by heating, in a kiln, a homogeneous mixture of raw materials to a sintering temperature, which is about 1450 °C for modern cement. The aluminum oxide and iron oxide are present as a flux and contribute little to the strength. For special cements, such as Low Heat (LH) and Sulfate Resistant (SR) types, it is necessary to limit the amount of tricalcium aluminate (3CaO.Al2O3) formed. The major raw material for the clinker-making is usually limestone (CaCO3) mixed with a second material containing clay as a source of alumino-silicate. Normally, an impure limestone which contains clay or SiO2 is used. The CaCO3 content of these limestones can be as low as 80%. Second raw materials (materials in the raw mix other than limestone) depend on the purity of the limestone. Some of the second raw materials used are clay, shale, sand, iron ore, bauxite, fly ash, and slag. When a cement kiln is fired by coal, the ash produced from the coal acts as a secondary raw material.

منتجات مصر بني سويف للأسمنت الاخرى

منتجات مماثلة

\