• شركة
  • المنتجات
  • الكتالوجات
  • الأخبار
  • الأحداث
  • المشاريع
  • الوظائف
  • العقارات
new

140 GC Motor Grader

Mohamed Abdulrahman Al-Bahar
الإمارات العربية المتحدة

المواصفات الفنيه

140 GC Motor Grader

The new Cat® 140 GC motor grader combines performance with cost efficient owning and operating. Servicing the machine is easy with grouped filter locations. Comfort options, including a heating/cooling system or air suspension seat, keep you productive throughout the day.

ENGINE

Net Power Range (Tier 3)
176 HP
Displacement
7.01 l
Bore
105 mm
Stroke
135 mm
Engine Model
Cat 7.1
Note (1)
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Torque - ISO 9249
889 N·m
Standard Capability
43 °C
Note (4)
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.
Derating Altitude
4500 m
Number of Cylinders
6
Emissions
U.S. EPA Tier 3/EU Stage IIIA
Note (3)
Power as declared per ISO 14396
Note (2)
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Torque Rise - ISO 9294
40%
Engine RPM
2,200

MACHINE WEIGHT

Weight*
17390 kg
Note
Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, ROPS closed cab, rear ripper/scarifier, 4.3 m (14 ft) blade, 17.5-25 MP tires on multi-piece rims and other equipment.

MOLDBOARD

Blade Width
3.7 m
Throat Clearance
112 mm
Blade Height
509 mm
End Bit
152 mm
Cutting Edge Width
152 mm
Arc Radius
413 mm

SERVICE REFILL CAPACITIES

Circle Drive without Slip Clutch
1.5 l
Circle Drive with Slip Clutch
7.5 l
Transmission
18 l
Cooling System
10.6 gal (US)
Hydraulic System
45 l
Fuel Tank
297 l
Engine Crankcase
21 l

BLADE RANGE

Moldboard Side Shift Left
663 mm
Maximum Depth of Cut
735 mm
Moldboard Side Shift Right
512 mm
Maximum Shoulder Reach Right
1928 mm
Maximum Lift Above Ground
480 mm
Circle Center Shift Left
752 mm
Maximum Shoulder Reach Left
1764 mm
Blade Tip Range Backward
5
Circle Center Shift Right
728 mm
Blade Tip Range Forward
40

DIMENSIONS

Width
2428 mm
Maximum Height
3839 mm
Length of Machine*
10322 mm
Note
*Typically equipped with push block and ripper.

AIR CONDITIONING SYSTEM

Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.

منتجات Mohamed Abdulrahman Al-Bahar الاخرى

منتجات مماثلة

\