VARIODECK Steel Waler Slab Table

The slab table with steel walers for large formwork areas and heavy pre-fabricated parts

VARIODECK is the ideal and safe solution for slab edge areas when panel slab formwork is to be used for the inner area. Slab areas of around 15 m² and up to 50 cm thick can be formed with the table. VARIODECK is quickly moved into the next story in each case with a single crane lift. Using the swivel head, the 4 props can be easily folded in the longitudinal direction of the table, e.g. for moving under beams.

Quickly ready for use
through the provision of pre-assembled tables – during assembly, only the lower part of the swivel head must be attached to the slab prop

High load-bearing capacity
with longitudinal-positioned steel walers which allow large cantilevers or can accommodate heavy prefabricated parts

Flexibly adaptable
by continuously moving the Table Swivel Head ± 15 cm

Technical Details

• Pre-assembled slab tables in 4 standard sizes (4.00 m x 2.15 m | 4.00 m x 2.65 m | 6.00 m x 2.15 m | 6.00 m x 2.65 m)
• For slab thicknesses up to 50 cm (with 4 MULTIPROP slab props); larger slab thicknesses or dimensions with additional support or PERI UP shoring
• Horizontal transportation throughout the story using the Table Trolley, Table Lift, or Transportation Wheel on the shoring
• Moving story to story with the crane and Table Lifting Fork
• Width compensation of up to 50 cm through protruding cross beams which serve as supporting surfaces for the formlining
• Can also be used as an edge table with guardrail holders and guardrail posts without any modifies cation of the prop positions
• Use as a safety scaffold by DIN 4420