MULTIPROP Aluminium Slab Props

Used as a cost-saving lightweight individual prop and cost-effective shoring tower

MULTIPROP Post Shores are used as individual props and – in combination with MULTIPROP frames – as shoring towers or load towers under tables. Compared with tubular steel slab props, the aluminum MULTIPROP carries significantly higher loads whilst, at the same time, having a very low dead weight. With different frame sizes, square or rectangular shoring towers can be optimally adapted to suit individual construction site conditions. The frames also serve as platform beams and side protection for working levels.

High load-bearing capacity
Fewer individual props per m² through permissible leg loads of up to 100 kN (according to type test)

Well thought-out details
With self-cleaning thread, trendsetting Adjusting Nut, and continuous adjustability

Time-saving length adjustment
The integrated measuring tape on the inner tube shows the complete length of the prop

Practical wedge connection
Multifunctional MRK Frame without any time-consuming bolted connections

Technical Details

• Aluminum slab props with powder coating for transferring vertical loads, particularly under slab formwork; as shoring towers with frames for transferring vertical loads over great heights
• Leg loads up to 100 kN by the type test
• Max. type-tested assembly height (shoring tower with MRK Frames): 14.40 m or 14.90 m (with Base Plate MP 50)
• Building authority approved
• Prop lengths: up to 1.20 m | 2.50 m | 3.50 m | 4.80 m | 6.25 m
• Steel MRK Frames are available in the following sizes: 62.5 cm | 75 cm | 90 cm | 120 cm | 137.5 cm | and 150 cm
• Aluminium MRK Frames are available in the following sizes: 201.5 cm | 225 cm | 230 cm | 237 cm | 266 cm | 296 cm
• Continuous thread for infinite adjustment of the prop height without pegging
• The adjustment range of up to 2.20 m (MP 480)
• Provides 36 mm of adjustment with every turn of the nut
• The securing hook prevents the inner tube from slipping out