PD 8 Shoring System

The cost-effective shoring for slab tables and high loads

PD 8 Shoring is predestined for use under slab tables – in particular, due to its large spindle extensions, the system can be quickly adapted to accommodate different slab heights as well as being lowered for moving under large beams.

The PD 8 is a cost-effective system for the erection of supporting frame structures in formwork construction. The frames consist of welded, fully galvanized tubular steel framework elements and are supplemented with spindles at the head and base thus forming rectangular or square shoring towers or suspended shear frames that can be joined together. Thereby, the basic dimensions under the slab tables range from 1.50 m x 1.25 m up to 1.50 m x 3.50 m. The shoring system can be used with up to 73 kN per leg for high leg loads and large room heights. All heights can be incrementally realized using just the Frames R 150 and R 110 and spindles. The two frames are tightly connected using diagonal bracing.

Quickly and continuously adaptable
with only 2 frame heights and large spindle extensions

High load-bearing capacity
with up to 73 kN leg load and for large slab heights

Large units easily moved
horizontally with a Trolley and Winch, and vertically using the Lifting Fork

Technical Details

• Scaffolding construction made of welded, completely galvanized steel tube elements with spindles at the head and base
• For loads up to 73 kN per leg (as slab table)
• Basic dimensions under the slab tables: 1.50 m x 1.25 m up to 1.50 m x 3.50 m
• Basic dimension of the shoring tower: 1.50 m x 1.50 m
• Basic dimensions of stair tower: 1.50 m x 3.00 m
• Continuous height adjustment from 1.55 m with only 2 frame sizes and up to 88 cm spindle extensions in the head and base areas respectively
• The easy horizontal moving procedure with the Trolley and Winch Unit
• Vertical repositioning with the PERI Transportation Fork